D2842LE406 marine engine – specifications, applications, and OEM parts
The D2842LE406 is a proven V12 marine diesel engine that stands out for its high power density, dependable operation, and lifecycle efficiency. While part of the MAN D D2842 series, the D2842LE406 has become a benchmark configuration for workboats and commercial vessels that require fast acceleration, robust mid‑range torque, and steady performance under constant load. Purchasers and technical decision-makers value this engine type for its balance of compact design, serviceability, and fuel economy in real-world marine duty.
As a 12-cylinder four-stroke unit with turbocharging and charge‑air cooling, the D2842LE406 is engineered to deliver reliable propulsion and auxiliary drive performance in demanding environments. Its architecture and component set are optimized for marine use—minimizing downtime while supporting consistent output in variable sea conditions.
D2842LE406 technical characteristics and performance
The D2842LE406 is a 90° V12 with a displacement of around 21.9 liters. A robust cast-iron block, wet liners, cross‑bolted main bearings, and high-capacity cooling passages provide structural stability and long service intervals. Depending on rating and setup, typical outputs fall in the range of approximately 735–880 kW (about 985–1,180 hp) at 1,800–2,100 rpm. Heavy-duty configurations are optimized for continuous operation at the lower end of the speed range, while light- and medium-duty ratings enable higher top-end speed for fast-response craft. The engine’s broad torque plateau supports quick throttle response, efficient maneuvering, and effective station keeping.
Key technical highlights include turbocharging with intercooling for high air mass flow, precise fuel metering with marine-calibrated injection, and optimized combustion geometry that supports low specific fuel consumption. Typical marine ratings are aligned with ISO/DIN standards for continuous and intermittent duty. In well-maintained setups, operators can expect stable specific fuel consumption figures in the ~195–205 g/kWh range, depending on load profile and propeller matching. The engine is widely integrated with mechanical or electronic governing systems, resilient mounts, and class-approved accessories to streamline installation across hull types.
- · V12, 4‑stroke, 90° bank angle; displacement ~21.9 L
- · Turbocharged and charge‑air cooled for high power density
- · Approx. 735–880 kW at 1,800–2,100 rpm, depending on rating
- · Strong low‑to‑mid range torque for maneuvering and towing
- · Marine-optimized cooling and lubrication for continuous duty
- · Efficient combustion with competitive fuel consumption
- · Compact footprint for repowers and newbuilds
- · Broad compatibility with class-compliant marine auxiliaries
Typical applications for the MAN D D2842LE406 marine diesel engine
The D2842LE406 is frequently selected for professional marine programs where uptime and predictable lifecycle costs matter. Common deployments include coastal cargo vessels, fast passenger craft, pilot boats, patrol and law‑enforcement vessels, crew transfer vessels, offshore support units, and fishing trawlers. In twin or quad installations, this MAN D D2842LE406 marine engine provides ample redundancy and thrust for demanding sea states. Beyond propulsion, the architecture also lends itself to auxiliary drive and marine genset configurations in shipboard power systems and stationary applications nearshore.
Shipyards and fleet operators value the D2842LE406 for its service access, established global support ecosystem, and integration flexibility. Whether paired with fixed-pitch or controllable-pitch propellers, waterjets, or hybrid drivetrains, the D2842LE406 diesel engine scales well from heavy workboats to high-speed response craft. For SEO clarity and procurement searches: D2842LE406 MAN D marine engine and D2842LE406 OEM parts are frequently specified in tender documents, refit scopes, and lifecycle management plans thanks to predictable performance and parts availability.
D2842LE406 maintenance, lifecycle efficiency, and uptime
Lifecycle performance of the D2842LE406 is driven by clean fuel supply, effective charge‑air cooling, and periodic condition-based inspections of injectors, turbochargers, and cooling circuits. The engine’s design supports straightforward access to service points, enabling short yard periods and efficient in‑field maintenance. When properly matched to the propeller curve and operated within rated load bands, the D2842LE406 maintains stable exhaust temperatures and lubricant condition—key to long service life and minimized overhaul frequency.
OEM spare parts suitable for D2842LE406: performance, reliability, and service life
For sustained performance and predictable maintenance cycles, OEM spare parts suitable for D2842LE406 are critical. Precision-matched components—such as injection nozzles, fuel pumps, pistons, liners, valves, turbocharger cartridges, and cooling elements—must align with the engine’s combustion and thermal profiles. OEM spare parts suitable for D2842LE406 safeguard output stability, uphold emissions conformity, and maintain the engineered clearances and material specs that protect bearings, cylinder wear surfaces, and rotating assemblies.
Using OEM spare parts suitable for D2842LE406 also streamlines troubleshooting and reduces rework, because component behavior and tolerances are calibrated for this exact engine type. In mixed-duty fleets, keeping the D2842LE406 on a standardized parts baseline simplifies inventory planning, supports condition monitoring trends, and helps keep total cost of ownership under control across multi-year maintenance programs.
- · Consistent power delivery and fuel efficiency
- · Correct tolerances for thermal and mechanical loads
- · Stable emissions performance across duty cycles
- · Reduced downtime through predictable fit and function
- · Easier diagnostics and fleet standardization
MOPA is a reliable partner for OEM spare parts suitable for D2842LE406. With rapid sourcing, technical support, and documentation alignment, MOPA helps shipowners and operators maintain availability targets while protecting the D2842LE406’s performance envelope over the long term.
Conclusion: why the D2842LE406 remains a trusted marine choice
The D2842LE406 combines compact V12 architecture with robust marine calibration to deliver dependable propulsion for commercial fleets and demanding offshore roles. Its balance of power, torque, and serviceability makes it a preferred choice for shipyards and operators seeking proven performance.
To sustain that performance and longevity, MOPA supplies OEM spare parts suitable for D2842LE406, ensuring the engine continues to operate efficiently, reliably, and within its designed performance parameters throughout its lifecycle.
