COUPLING HALF

COUPLING HALF Clutches for Marine and Industrial Engines

Clutches are precision torque-transmission assemblies that engage and disengage the power flow between an engine and the driven system—gearbox, generator, pump, or propeller shaft. In heavy-duty diesel and gas applications, clutches enable controlled starts, protect driveline components from shock loads, and help manage torsional vibrations. Within this category, a COUPLING HALF is the key interface that connects the clutch assembly to the engine flywheel or the input shaft of the driven machine, ensuring alignment, concentricity, and reliable torque transfer.

Whether installed in a marine engine room or an industrial power plant, clutches determine how smoothly energy is delivered and how efficiently assets operate across varying loads. Correctly engineered components, precise fit, and robust materials directly influence availability, fuel efficiency, and the service life of connected equipment.

Technical Function: Clutches and the COUPLING HALF in diesel engine drivetrains

In an engine-driven system, the clutch manages the engagement between the rotating crankshaft and the drivetrain. A typical configuration includes two coupling halves: the driving side mounted to the flywheel and the driven side connected to the transmission input or generator hub. The COUPLING HALF provides the mechanical interface—flanges, pilot registers, splines, or keyways—that aligns the assemblies and transmits torque with minimal runout. In a marine engine application, a COUPLING HALF for marine engine duty is often engineered with high-strength alloy steel or ductile iron, precision-balanced to ISO standards to reduce vibration at rated speed.

Torque capacity is defined by friction area, clamp load, and friction material characteristics in dry or wet multi-plate designs. In wet clutches, oil cooling dissipates heat during slip phases, preventing thermal degradation. Actuation is typically hydraulic or pneumatic, using controlled pressure ramp-up to avoid shock loads on gear trains and shafts. The COUPLING HALF ensures concentric engagement, maintains spline integrity under cyclic loads, and preserves alignment across thermal growth and hull or skid deflection. In diesel engine systems, a properly specified COUPLING HALF OEM parts set minimizes micro-movements, reducing fretting corrosion and spline wear over extended duty cycles.

· Controlled torque engagement and disengagement.
· High torsional stiffness with tuned damping options.
· Precision alignment via machined pilots and flanges.
· Heat management with wet multi-plate designs.
· Robust metallurgy for shock and cyclic fatigue resistance.
· Low runout and balanced rotation for reduced vibration.
· Service-friendly design for inspections and overhauls.
· COUPLING HALF compatibility with diesel and marine engine interfaces.

By safeguarding engagement quality and alignment, clutches protect downstream components—bearings, seals, gear teeth—while enabling smooth synchronization of generators and precise control of propulsion loads.

Importance for Engine Operation: Why Clutches and each COUPLING HALF matter

The clutch is central to driveline reliability. If wear progresses unchecked—friction lining glazing, plate warpage, weakened diaphragm springs, or spline fretting—the system can exhibit slip under load, overheating, and loss of torque capacity. Misalignment or imbalance at the COUPLING HALF accelerates bearing wear, raises vibration levels, and can cause gear pitting or shaft damage. In marine service, degraded engagement can compromise maneuvering, increase fuel consumption during docking, and raise the risk of unplanned downtime offshore.

Conversely, a healthy clutch with a dimensionally correct COUPLING HALF maintains stable torsional behavior, supports clean generator synchronization, reduces shock loads during start-up, and extends the life of adjacent assets. The net effect is higher availability, better efficiency across partial loads, and predictable maintenance intervals.

Benefits of OEM spare parts suitable for Clutches and COUPLING HALF

Selecting OEM spare parts suitable for clutches—especially the COUPLING HALF—ensures the correct tolerances, materials, and balancing values defined for the specific engine model and application. Dimensional accuracy at the pilot and bolt circle, matched spline profiles, and certified heat treatment are critical to prevent micro-slippage and vibration. COUPLING HALF OEM parts are validated for surface hardness, concentricity, and mass distribution, all of which directly affect engagement smoothness and component life.

From a lifecycle perspective, the right specification reduces fuel penalties from slip, minimizes heat-related degradation, and protects high-value components like gearboxes and alternators. Documentation and traceability support class compliance in marine contexts, while consistent quality shortens installation time and reduces the risk of rework. The result is dependable performance, better budget control over the asset’s life, and sustained uptime for diesel engine and gas engine fleets.

Fit, materials, and balancing of COUPLING HALF OEM parts

Precision fit on the flywheel register or shaft spline prevents runout and fretting. Metallurgy—often alloy steels with controlled carbon content and case hardening—resists cyclic torsion and shock. Dynamic balancing to the assembly’s required grade helps keep vibration within acceptable limits across the speed range, critical for marine engine comfort levels and bearing longevity. These attributes combine to preserve performance and extend maintenance intervals.

MOPA as a partner for OEM parts: Clutches and COUPLING HALF supply

MOPA is an experienced and reliable partner for OEM spare parts in the Clutches category, including every critical COUPLING HALF variant for diesel and gas engines. Customers benefit from fast response, rigorous quality standards, and secure, documented handling throughout the supply chain. MOPA supports purchasers and shipowners with technical clarity on fit and compatibility, efficient logistics for urgent dockings, and safe packaging suited to marine and industrial environments.

Whether you need a COUPLING HALF for marine engine propulsion, a diesel engine generator set clutch, or aligned OEM parts for a fleet standardization program, MOPA streamlines sourcing and mitigates risk with proven processes and dependable delivery.

Conclusion

Clutches are mission-critical for controlled power transmission, and the COUPLING HALF is the precision interface that makes reliable torque transfer possible. Selecting OEM spare parts suitable for this category safeguards alignment, durability, and efficiency—protecting your engine investment and keeping operations on schedule.

COUPLING HALF - 12036752 suitable for MWM & Deutz engines

Excellent OEM Replacement Part for Various ApplicationsDiscover the Coupling half, a top-quality OEM replacement part suitable for MWM & Deutz engines. With the comparison number 12036752, this product offers precise compatibility, essential for the performance of your diesel and gas engines. Weighing 0.895 kg, this component is both functional and easy to handle.Precision and Highest QualityOur Coupling half is not just an important component, but also a contribution to longevity. The internal quality control during the manufacturing of these OEM replacement parts ensures that you can rely on consistently high quality. Look forward to a future where you can expect adjustments and improvements for your MWM & Deutz engines, as we always offer the best precision.

% Secure special price. Register now!

€282.06 €313.40(10% saved)

COUPLING HALF - 12087800 suitable for MWM & Deutz engines

Optimal Coupling Half for Efficient ApplicationsThe coupling half with the comparison number 12087800 offers an ideal solution for users of MWM & Deutz engines. This product impresses with top-notch quality and reliable performance. Weighing 0.178 kg, the coupling half is light enough to be used efficiently without sacrificing durability and optimizing the functionality of engines.Compatible with MWM & Deutz EnginesThe coupling half is an OEM replacement part and is suitable for MWM & Deutz. It ensures optimal fitting for your machinery. With our specialization in spare parts, we provide products that are fully tailored to the needs of your engines.