FLANGE COUPLING

FLANGE COUPLING Clutches for Marine and Industrial Engines

Clutches are precision components that enable controlled engagement and disengagement of power between the engine and driven equipment. In marine propulsion, power generation, oil and gas, and industrial applications, clutches connect diesel or gas engines to gearboxes, alternators, propulsors, and pumps. Their interface with the shaft line is commonly realized through a FLANGE COUPLING, which ensures concentricity, secure torque transfer, and low-vibration operation. Because clutches sit at the heart of the driveline, their specification and condition have a decisive impact on uptime, efficiency, and lifecycle cost.

Within heavy-duty installations, clutches are engineered to manage high torque, frequent start/stop cycles, and varying thermal loads. Whether configured as dry single-plate, wet multi-disc, or pneumatically/hydraulically actuated units, the combination of clutch pack, hub, and FLANGE COUPLING pattern must match the engine’s output and the driven machine’s torsional profile to protect equipment and ensure safe, predictable operation.

Technical function of clutches with FLANGE COUPLING interfaces

Clutches transmit torque by pressing friction surfaces together with a controlled force. In a diesel engine application, the torque path runs from the flywheel through the clutch pack to the hub and onward via the FLANGE COUPLING to the gearbox or shaft line. Engagement force is applied mechanically, hydraulically, or pneumatically to clamp the friction discs between pressure plates. When engaged, the clutch delivers near-rigid torque transfer; when disengaged, it isolates the engine for starting, idling, or maintenance.

In a marine engine setup, the FLANGE COUPLING ensures accurate alignment to the marine gear and maintains axial and radial positioning under load. This reduces runout, minimizes bearing loads, and limits vibration transmitted to the hull or foundation. In generator sets, the coupling-to-hub geometry maintains balance (often to ISO 1940 grades) so that torsional resonances and harmonics do not compromise performance or shorten the life of bearings and seals. Properly matched clutch friction materials—such as sintered bronze, paper, or carbon—handle thermal input during slip, while the coupling bolt pattern and pilot diameter achieve repeatable, service-friendly assembly.

When specified with the right actuation and FLANGE COUPLING pattern, clutches protect downstream components during transient events: start-up, load acceptance, reversing, and emergency stop. This improves efficiency by reducing unnecessary slip losses and enhances safety by delivering predictable engagement, even in high-inertia systems. For sourcing and maintenance, using FLANGE COUPLING OEM parts matched to the clutch hub and bolt circle simplifies installation and preserves the engineered fit.

· High torque density with compact envelope dimensions.
· Controlled engagement reduces shock loads and wear.
· Torsional vibration management protects the drivetrain.
· Precise FLANGE COUPLING interfaces ensure concentric alignment.
· Choice of friction linings for diesel engine and gas engine duty.
· Hydraulic or pneumatic actuation for consistent clamp force.
· Service indicators and shimming options enable repeatable overhaul.
· Engineered bolt patterns and pilot fits speed up maintenance.

Importance for engine operation and service life

Clutches are critical to reliability. If friction discs glaze or wear beyond limits, slip increases, heat builds, and torque transfer declines—raising fuel consumption and risking thermal cracking of plates. Distorted pressure plates or weak actuation can produce intermittent engagement, causing chatter, accelerated spline wear, and damage to mating gears. Misalignment at the FLANGE COUPLING raises bearing temperatures and leads to premature failures in seals and couplings. In wet clutches, oil contamination and degraded friction modifiers change the coefficient of friction, reducing control and increasing stopping distances.

These issues escalate quickly in marine engine service, where long duty cycles and high load factors are typical. Poorly performing clutches can induce torsional resonance, amplifying stress on shafts and gear teeth. The outcome is avoidable downtime, unplanned dry-docking, and higher lifecycle costs. Maintaining the clutch and its FLANGE COUPLING interface to specification keeps the powertrain stable, lowers vibration, and extends the service life of the entire driveline.

Advantages of OEM spare parts suitable for clutches and FLANGE COUPLING assemblies

OEM spare parts deliver repeatable quality and an exact fit to the engineered design. Friction discs, pressure plates, hubs, and FLANGE COUPLING hardware produced to the engine builder’s specifications preserve torque capacity, thermal performance, and balance. Accurate spline geometry, correct hub hardness, and validated friction materials maintain engagement characteristics over thousands of cycles. Fasteners, pilots, and dowel locations machined to tight tolerances reduce installation time and the risk of misalignment.

From a budget perspective, parts that match the original design intent reduce the frequency of overhauls and protect adjacent components such as bearings, seals, and gears. Documentation and traceability streamline class approvals and audits in marine environments. In practice, this means shorter outages, predictable maintenance windows, and stable total cost of ownership—all while safeguarding engine efficiency and safety.

MOPA as a partner for OEM spare parts clutches and FLANGE COUPLING needs

MOPA supports purchasers, shipowners, and technical decision-makers with fast, reliable sourcing of OEM parts for diesel and gas engines. The focus is on quality, speed, and security—rapid identification of the correct clutch kit, friction packs, hubs, and matching FLANGE COUPLING components; dependable logistics to major ports and industrial hubs; and rigorous checks that align with engine maker specifications. Cross-referencing by engine model and serial number reduces error risk, while consolidated kitting minimizes downtime during planned maintenance.

Speed, quality, and security in the trade of OEM parts

With MOPA, you benefit from responsive quotations, efficient shipment handling, and consistent part traceability. Quality processes ensure materials and machining meet the required standards for torque capacity, balance, and fit. Commercial and documentation workflows are designed to reduce transaction risk, support compliance, and keep projects on schedule—whether for a single clutch overhaul or a fleet-wide maintenance program.

Conclusion: FLANGE COUPLING clutches for diesel and gas engines

Clutches are central to safe, efficient power transmission, and their performance depends on precise interfaces—especially the FLANGE COUPLING that aligns the engine to the driven machine. Keeping these components to specification sustains torque capacity, reduces vibration, and extends service life.

OEM spare parts suitable for clutches and their FLANGE COUPLING connections preserve engineered performance while controlling downtime and lifecycle cost. With MOPA as your partner, you gain speed, quality, and security in every step of the OEM parts supply chain.

FLANGE COUPLING - 12294293 suitable for MWM & Deutz engines

Efficient Power Transmission: Flange Coupling 12294293Discover the flange coupling with the comparison number 12294293 – a necessary OEM spare part that is perfectly tailored to the requirements of engines. The robust construction and precise specifications make this product an excellent choice for those who value performance. Weighing 117 kg, this flange coupling ensures safety and reliability even under extreme conditions.Sturdy Bearing Options: Parts Suitable for MWM & DeutzThe flange coupling is manufactured to fit MWM & Deutz engines and enables smooth power transmission in various applications. Our certified OEM spare parts are specifically designed to meet your needs and fulfill the demands of challenging operating environments. This flange coupling supports you in the long-term optimal use of your machines.

% Secure special price. Register now!

€7,257.86 €8,064.29(10% saved)

FLANGE COUPLING - 15025693 suitable for MWM & Deutz engines

Flange coupling with comparison number 15025693Discover the flange coupling, the reliable OEM replacement part with the comparison number 15025693. This product is suitable for MWM & Deutz engines and optimizes your machine performance in demanding applications. Our flange coupling belongs to the category of clutches and meets the highest quality standards.