SHAPED FLANGE

SHAPED FLANGE holders, plates and flanges for critical engine interfaces

Holders, plates and flanges are structural interface components that connect, support and seal the most vital systems of an engine. From fastening pumps and coolers to aligning manifolds and routing fuel, air and exhaust, these parts translate design intent into durable, repeatable, and safe operation. In heavy-duty diesel and gas engines—especially in marine engine rooms exposed to vibration, thermal cycles, and saline air—robust holders, accurately machined plates and a precisely matched SHAPED FLANGE determine whether assemblies stay aligned, leak-free and serviceable across long maintenance intervals.

Within this article category, holders provide rigid mounting and routing points; plates act as adapter, cover, or reinforcement elements; and flanges create the sealed, load-bearing joints between housings, pipework and auxiliaries. Their shared purpose is to maintain alignment, manage loads, contain fluids and gases, and enable reliable maintenance in demanding operating environments.

Technical function of SHAPED FLANGE holders, plates and flanges in diesel engine and marine engine systems

In an engine, a SHAPED FLANGE forms the high-precision interface between components with non-standard or contoured mating faces—such as turbocharger outlets to charge-air coolers, exhaust manifolds to expansion joints, or coolant distribution blocks to piping. The geometry of a SHAPED FLANGE is tailored to the envelope of the mating parts, ensuring bolt-load symmetry, gasket contact stress, concentricity, and minimal face run-out. When paired with the right holders and adapter plates, these interfaces preserve alignment under vibration and thermal growth, preventing micro-movement that leads to fretting, fatigue and leaks.

Functionally, holders keep sensors, injector lines, cable harnesses and pipe spools in their designed positions, limiting dynamic loads and resonance. Plates provide stiffness, distribute clamping forces, adapt bolt patterns, and close inspection or service openings. Together with SHAPED FLANGE OEM parts, they create sealed joints with controlled surface roughness and serration patterns for gasket performance, support proper torque sequence and preload, and maintain dimensional stability across heat cycles typical of a diesel engine duty profile.

Material selection—such as alloy steel, stainless steel or coated carbon steel—addresses corrosion, temperature and mechanical stress. Surface treatments (e.g., phosphate, zinc, or specialized coatings) protect against marine atmosphere and condensate; precision machining controls flatness and surface finish for long-term sealing integrity. By providing the correct stiffness and thickness, plates and flanges distribute loads so that fasteners maintain clamp force, while holders incorporate relief features or bushings to accommodate thermal expansion and avoid transferring excessive stress to housings.

· Precise geometry for leak-tight, high-load joints.
· Correct gasket seating pressure and face finish.
· Stable alignment of manifolds, pumps and pipework.
· Vibration control to reduce fatigue and fretting.
· Corrosion resistance for marine engine environments.
· Service-friendly design for repeatable assembly.
· Material and heat-treatment consistency for longevity.
· Compliance with engine-maker dimensional requirements.

Why SHAPED FLANGE holders, plates and flanges are critical for reliable engine operation

Reliability and service life depend on how well interfaces retain clamp load and alignment. If a holder loosens, a plate distorts, or a SHAPED FLANGE face degrades, several problems can escalate quickly: boost air losses that impair turbo efficiency, exhaust leaks that raise backpressure and temperature, coolant and lube leaks with fire and contamination risk, and misalignment that accelerates bearing and seal wear. Even minor gasket creep or bolt relaxation can trigger progressive leakage, corrosion at the joint, and eventual joint failure.

On high-output diesel engine and gas engine installations, improper flange geometry or inadequate plate stiffness can lead to flange rotation, gasket blowouts, bolt bending, and local hot spots. In marine engine service, salt-laden moisture exacerbates crevice corrosion at imperfect joints, making correct materials and surface treatments essential. By ensuring precise interfaces and robust support, holders, plates and SHAPED FLANGE components protect performance, reduce unplanned downtime and keep maintenance intervals predictable.

Advantages of OEM spare parts suitable for holders, plates and flanges

Choosing OEM spare parts suitable for this category secures dimensional match, material specification, and surface finish as defined by the engine design. That consistency is critical for preload retention, gasket compression, and vibration behavior—factors that drive efficiency, emissions stability and component life. OEM parts arrive with the correct bolt patterns, counterbores, chamfers and sealing features, enabling drop-in replacement without rework or shimming, which saves yard time and reduces risk during tight overhauls.

From a budget perspective, the lowest lifecycle cost often comes from parts that maintain seal integrity longer and preserve mating components from wear. Correct heat treatment and metallurgy reduce distortion during service, while verified coatings delay corrosion in marine engine spaces. For safety, OEM holders, plates and SHAPED FLANGE components are built to withstand specified pressures and temperatures so that joints remain secure across operating transients, including cold starts, load jumps and emergency stops.

MOPA — fast, secure supply of SHAPED FLANGE OEM parts for diesel and gas engines

MOPA is a trusted partner for OEM spare parts across holders, plates and flanges. Our focus is speed, quality and security in the global trade of OEM parts for diesel and gas engines, including marine engine applications. We help purchasers and technical teams identify the exact SHAPED FLANGE geometry, material grade and surface finish required, and we support cross-referencing of part numbers to ensure precise fit and performance.

Backed by quality-controlled sourcing and robust logistics, MOPA delivers on tight schedules, supports documentation needs, and maintains clear traceability. Whether you are planning a dry-dock overhaul or an in-situ repair, we streamline procurement to keep downtime low and performance consistent.

Conclusion — SHAPED FLANGE holders, plates and flanges that protect performance

Holders, plates and SHAPED FLANGE components are the backbone of engine interfaces, safeguarding alignment, sealing and structural integrity under demanding conditions. Selecting OEM spare parts suitable for this category preserves efficiency, reliability and service life while controlling maintenance costs.

SHAPED FLANGE - 623209500214 suitable for MWM & Deutz engines

Quality at a Glance: Shaped Flange Comparison Number 623209500214The shaped flange with the comparison number 623209500214 is an important construction product that is indispensable for efficient engine operations. As part of the product group "Holders, plates and flanges," this product offers excellent connection and reliability, necessary for diesel and gas engines. Ideal for applications in the marine sector and stationary use, it is the perfect solution for specific requirements.Application Suitable for MWM & Deutz EnginesThis component is suitable for MWM & Deutz engines and optimizes the functioning of your drive technology. Weighing 0.85 kg, the shaped flange integrates excellently into various engine endpoint instruments and ensures maximum performance during operation. Every welding application is tailored to the high demands of the manufacturers MWM & Deutz.

% Secure special price. Register now!