GEARED PUMP

GEARED PUMP Pumps, parts and accessories

Pumps, parts and accessories are core components that sustain vital flows inside marine and stationary engines. They move and meter liquids such as lube oil, fuel, coolant and hydraulic fluid, enabling precise pressure and flow control from start-up to full load. Within this category, the GEARED PUMP stands out as a robust positive-displacement solution used across marine engine and diesel engine platforms to ensure reliable lubrication, fuel transfer, pre‑heating circuits and control hydraulics. Accessories—including drive couplings, relief valves, filters, seals and instrumentation—complete the system and keep performance stable over long operating intervals.

Because engines depend on clean, correctly pressurized fluids, Pumps, parts and accessories directly influence uptime, efficiency and safety. A well‑configured system with a correctly sized GEARED PUMP, matched clearances, proper materials and certified OEM parts maintains oil film integrity, protects bearings and injectors, stabilizes temperatures and reduces wear across the entire powertrain.

Technical function of Pumps, parts and accessories with GEARED PUMP in diesel and marine engine systems

A GEARED PUMP uses two meshing gears in a close‑fitting housing to create suction at the inlet and discharge at the outlet. As the gears rotate, trapped volumes of fluid are carried around the gear periphery and displaced into the pressure side. Because it is a positive‑displacement design, delivered flow is proportional to shaft speed, making it highly predictable in a diesel engine or a heavy‑duty marine engine where stable oil or fuel flow is critical. Common configurations include external gear (spur or helical) for simplicity and durability, and internal gear variants for lower pulsation and improved suction performance.

In a marine engine, a GEARED PUMP often serves as the lube oil pump to build base pressure for the entire lubrication circuit, feeding main bearings, camshaft journals and turbocharger bearings. It also appears as a fuel transfer or booster pump that maintains consistent feed pressure to filters and high‑pressure injection equipment, preventing vapor formation and improving atomization. Accessories such as integrated relief valves protect the circuit from overpressure, while check valves, strainers, temperature sensors and differential pressure gauges keep operation within the specified envelope. Correct pairing of the pump with drive couplings, elastomeric seals (e.g., FKM, NBR), bushings and shaft materials ensures chemical compatibility and long life.

In practice, performance depends on volumetric efficiency (minimizing internal leakage through optimized gear tip and side clearances), mechanical efficiency (low friction bearings and surface finishes) and adequate inlet conditions to avoid cavitation. With OEM parts, tolerances and surface treatments match the intended design, keeping flow delivery consistent across the operating range and maintaining safety margins for both cold starts and high‑temperature, high‑load operation.

· Stable, speed‑proportional flow for precise lubrication and fuel feed.
· Compact design with high power density and straightforward maintenance.
· Broad viscosity window for lube oil, diesel, HFO blends and hydraulic fluids.
· Integrated relief options to protect lines and downstream components.
· Low NPSH variants to reduce cavitation in challenging inlets.
· Material and seal options tailored to temperature and media compatibility.
· Easy condition monitoring via pressure, temperature and vibration signals.
· Proven reliability in continuous‑duty diesel engine and marine engine service.

Why Pumps, parts and accessories are critical to engine reliability

Fluids are the lifeblood of any engine. If a lube oil GEARED PUMP loses efficiency due to wear or contamination, oil pressure drops and the hydrodynamic film collapses—accelerating bearing wear, increasing frictional losses and elevating component temperatures. In fuel systems, degraded pump gears or leaking seals cause erratic feed pressure, which can impair injection timing, enlarge droplet size and increase specific fuel consumption. Cavitation from restricted inlets or worn bushings leads to pitting, noise and vibration, eventually cracking housings or damaging couplings.

Accessories matter equally. A sticking relief valve can bypass too much flow, reducing pressure at critical nodes. A clogged strainer starves the inlet and promotes cavitation. Aging seals allow air ingress on the suction side or fuel/oil leaks on the discharge side—both of which pose safety and environmental risks. Routine inspection of pressure differentials, temperature rise across the pump, and shaft vibration helps detect early deviations. Timely replacement of Pumps, parts and accessories restores clearances, reestablishes volumetric efficiency and prevents cascading failures in bearings, injectors, turbochargers and heat exchangers.

Advantages of OEM spare parts suitable for Pumps, parts and accessories

For sustained performance and predictable lifecycle cost, OEM spare parts keep the GEARED PUMP and its accessories aligned with the engine maker’s specification. Dimensional accuracy of gears, shafts and housings preserves the designed internal leakage paths and backlash, maintaining steady flow at low and high speeds. Correct metallurgy and heat treatment resist scuffing and micro‑pitting, while surface finishes reduce friction and startup wear. Seals, gaskets and O‑rings selected by the OEM resist the exact fuel blends, lube oils and coolants used in your operation, minimizing swelling, shrinkage or chemical attack.

Using OEM parts also reduces installation risk. Components fit without rework, couplings align properly, and relief valves open at the documented setpoints—shortening downtime and lowering commissioning effort. Traceable documentation and quality checks add confidence that the pump will deliver the specified pressure and flow, supporting compliance with class society requirements on marine engine lubrication and fuel systems. Over time, the result is higher reliability, better energy efficiency through maintained clearances, fewer unplanned stoppages and a stronger budget position through reduced secondary damage and shorter maintenance windows.

MOPA – your partner for OEM parts for GEARED PUMP Pumps, parts and accessories

MOPA supplies OEM spare parts for Pumps, parts and accessories with a focus on speed, quality and secure transactions. Whether you need a GEARED PUMP for a diesel engine lube circuit, a booster pump for a marine engine fuel line, or matching accessories such as relief valves, couplings, seals and strainers, MOPA provides responsive sourcing and global logistics. Our team supports identification by serial and part numbers, offers precise cross‑references and delivers documentation to streamline your purchasing and maintenance processes.

Fast delivery and secure trade for GEARED PUMP OEM parts

With strategically positioned stock, tested supplier networks and careful packing standards, MOPA reduces lead time and risk from order to installation. You benefit from consistent quality, technical clarity and components that fit first time—helping your engines return to service quickly and operate reliably across diesel and gas applications.

Conclusion: Pumps, parts and accessories and GEARED PUMP benefits

Pumps, parts and accessories—anchored by the GEARED PUMP—are fundamental to engine performance, efficiency and safety. Selecting OEM spare parts suitable for this category preserves design clearances, stabilizes flow and pressure, and extends equipment life with predictable cost and minimal downtime.

GEARED PUMP - 51121017145 suitable for MAN D engines

GEARED PUMP with the comparison number 51121017145 suitable for MAN D engines

% Secure special price. Register now!

€2,024.33 €2,249.26(10% saved)

GEARED PUMP - 03380159 suitable for MWM & Deutz engines

Geared pump suitable for MWM & Deutz: Robust and EfficientDiscover the reliability of our geared pump with the comparison number 03380159. This product is specifically designed to harmonize optimally with MWM & Deutz engines. To achieve the best results from your diesel engines in marine and stationary applications, a precise and stable replacement part is essential. Choosing this geared pump is therefore a decision for top performance!